New Product

HOME > New Product

Flow rate : 360L/min[ANR]. Vacuum filter for large flow vacuum generators and vacuum pumps.

Large Flow Vacuum Filter

WEB release 2018/07

WEB last update 2018/07/13

    • Flow rate : 360L/min[ANR]. ※ Large capacity enables to secure large processing flow rate.
      The filter removes dust particles sucked with air, and protects a vacuum generator or vacuum pump.
      ※Processing flow rate with the conditions under filtration accuracy : 5μm and pressure loss : 3kPa of a representative filter.
      • Four types of filtration accuracy can be selected according to applications.
        Filtration accuracy : 1μm, 5μm, 10μm, 200μm
      • Various types of connections
        Taper pipe female thread, Parallel pipe female thread and Push-in fitting are available.
      • Resin body realized light weight.

Return to the page top.

You can save cost up to 30%, compared with the conventional Tube Fitting PP series.

Tube Fitting PP series SUS303 like Corrosivity type is added.

WEB release 2018/07

WEB last update 2018/07/02

    • Adopting special stainless steel (or SUS303) for metal material. You can save the cost up to 30%, compared with the conventional Tube fitting PP series.
      ※Corrosivity level of the special stainless steel is equivalent to SUS303.
      • PP, suitable for clean environment, for main body material. EPDM for sealing material.
      • Thread material is selectable from PP resin and special stainless steel (or SUS303).
      • No exposure of metal on liquid contact parts. (Thread type : PP only)

Return to the page top.

Stainless steel valve suitable to use with chemical and mixed gass.

Stainless Ball Valve

WEB release 2018/01

WEB last update 2018/01/18

    • SUS316 equivalent material (SUS316 or CF8M) for fluid contact part.
    • Stem for fixing the handle will not come off the valve body.
      Prevent stem come-off from valve body.
    • No restriction for flow direction.
      IN/OUT flow can be connected to both side of valve.
    • Cleaning Specification.

Return to the page top.

Suitable for chemical liquid piping in semiconductor manufacturing process.

Fluororesin equipment

WEB release 2017/10

WEB last update 2018/04/18

    • High pull-out strength and sealability are realized.
    • Made of PFA and PTFE with high chemical and heat resistance.
    • Clean washing + clean packaging
    • Fitting and Needle valve for flow adjustment are available.
    • This item is NOT available for U.S.A. market.

Return to the page top.

Securing high vacuum of -94kPa, and large suction flow rate of Max. 1,110ℓ/min[ANR].

Large Flow Vacuum Generator VLM

WEB release 2017/10

WEB last update 2017/10/13

    • Multi stage nozzle ejector with multi layer structure.
    • Securing high vacuum and large flow rate.
      By adoption of multi-stage nozzle and multi layer structure, suction flow can be secured approx. 2.2times (on average) larger than air consumption..
    • Excellent in ozone resistance. FKM for all sealing rubber.
    • Suitable for various industrial fields that require large flow rate.

Return to the page top.

Large flow type of 2-stage Speed Controller is launched.

New line up for 2-stage Speed Controller.

WEB release 2017/10

WEB last update 2017/09/28

    • Realizes the 2-stage control of cylinder speed  by the operations of three needles.
    • Tube size: ø10mm was newly added.
    • Large flow type of tube size : ø4, ø6 and ø8mm were newly added.
      Enables to ensure larger flow rate with same tube size as conventional type.

Return to the page top.

It prevents unnecessary manual adjustments during the operations.

Slot-head Speed Controller

WEB release 2016/11

WEB last update 2016/12/19

    • Use a slot screwdriver to adjust the needle.
    • Approx. 2/3 height of the conventional speed controller.*
      Suitable for a small space.  *Compared to the max. height of the conventional speed controller.
    • 2 types(Elbow and Free type) are available. Free direction for piping.

Return to the page top.

Industry's First! (Patent no. 5578502). The function of a shock absorber is built in a speed controller.

2-stage Speed Controller is introduced

WEB release 2015/03

WEB last update 2017/02/14

    • Inch tube sizes, 5/32", 1/4", and 5/16" are introduced.
    • Shock absorber, cylinder mounting type, is not necessary.
      Two-stage exhaust flow rate adjustment is realized. By using 2nd stage exhaust speed to be as cushion (brake), controlling like a shock absorber is possible.
    • Shock absorbing (cushion) property (EX2) is adjustable.
      Speed control (EX1), shock absorbing (cushion) strength (EX2), and start timing of shock absorber (TIM) are separately adjustable.
    • Durability is about 3 times of a shock absorber.
      Durability of BJSU is more than 3 times of a normal cylinder mounting type shock absorber. Thus, reducing the cost and the frequency of the maintenace are possible in long-run operation.

Return to the page top.

Peeling only the flame retardant cover of PISCO FB tube like sharpening a pencil.

Antispatter Tube Cover Peeler

WEB release 2014/12

WEB last update 2014/12/09

    • Peeling only the flame retardant cover appropriate for the tube inserting length of Pisco's anti-spatter products.
    • No damage to the inner tube.
    • The transparent body enables to check cutting progress easily.

Return to the page top.

Reducing the fluctuations and pulsations of compressed air and vacuum.

Air Tank is introduced.

WEB release 2014/11

WEB last update 2015/09/26

    • Tank capacity is selectable from 6 variations.
      0.4L, 0.75L, 2L, 5L, 10L, 20L
    • The tank is made of stainless steel.
      ・Tank of 0.4~10 liters capacity: SUS304 equivalent.
      ・Tank of 20 liters capacity: SUS321 equivalent.
    • Corresponding to RoHS directive.
    • IMPORTANT: This tank does not have any construction code for pressure vessels outside of Japan, therefore it may not meet your local regulation, please check your local regulation first before ordering if a certificate is the requirement for importing.

Return to the page top.

Multi-stage nozzle vacuum generator ensuring high vacuum pressure and high vacuum flow by low 0.35MPa air supply.

Vacuum Generator VVV

WEB release 2014/11

WEB last update 2014/12/09

    • Vacuum port is distributed into 3 ports.
    • Not only suction transport application but vacuum packing, defoaming, or deaeration application is also recommended.
      Best suitable for a large & heavy workpiece in industries such as packaging or automobile, or suitable for an air-permeable workpiece.
    • Easy maintenance and long life.

Return to the page top.

Fixed orifice push-in fitting. Orifice bore ø0.1㎜ & ø0.2 ㎜ are added.

Fixed Orifice Joint series, Standard type & Mini type

WEB release 2013/11

WEB last update 2014/01/28

    • Orifice bore: Min, ø0.1 to max. ø2.0 mm.
      The size can be selected by 0.1mm increment.
    • Fixed Orifice Joint series can be installed in a small space.
      M5 thread type (only for mini type) is newly launched. Responding to compact piping.
    • Compared to needle valves, reasonable price.

Return to the page top.

A solution to your complicated piping ! Color cap new types are released.

Color Cap New Types

WEB release 2013/10

WEB last update 2014/01/28

    • Color cap new types can fit on push-in fittings whose release rings sit next to next such as union Y types (PY types), which is not achieved by conventional color caps.
    • 10 color variation
    • Same color combination of a color cap and a tube helps easy piping.

Return to the page top.

Inch size is newly released! Tube Fitting PP type which is best suitable for clean environment.

Tube Fitting PP type in Inch tube size

WEB release 2013/10

WEB last update 2014/01/28

    • Body material is made of PP resin which is suitable for clean environment.
    • Clear (semitransparent) resin body, fluid (liquid) flow can be checked visually.
      Hygienic condition can be easily checked.
    • Oil-free specification which enable to meet variety of needs.
    • Variety of materials and specifications
      ・Thread materials : PP resin or SUS 304
      ・Rubber part materials : Standard spec. is EPDM. Options are FKM, HNBR and NBR
      ・Packaging spec. : Standard packaging spec, Clean-room packaging spec. in which a product is washed by clean air
        and packaged in a clean-room corresponding to ISO class 6, and Clean-wash spec. in which a product goes through
        vacuum ultrasonic cleaning by HFE(hydro fluoro ether) in a clean-room and is packaged with deaeration packaging

Return to the page top.

Easily viewable 2-line LCD screen. 30 mm square sensor of high visibile 3-color display.

Large digital display pressure sensor 31 series

WEB release 2013/09

WEB last update 2016/11/08

    • 2-Color display depending on output.
      Main display : Pressure value (Red or green)
      Sub-display : Set point (Orange)
    • Compact body.
      Body size is width 30 mm and height 30 mm
    • Locking mechanism is built in.
      Locking mechanism prevents accidental output when pressing the key mistakenly.
    • Excellent cost performance.
      Over 40% of cost cut was realized compared to Large digital pressure sensor 30 series.
    • Built in power saving mode reduces power consumption by 30%.
      Unless any button is pushed at power saving mode, the main display enters power saving mode in 30 seconds.
    • Rich option parts
      Wall bracket, Upright bracket, Panel adapter set

Return to the page top.

With digital indication of pressure, easy to check.

Digital Pressure Gauge

WEB release 2013/09

WEB last update 2014/01/28

    • Compact body
      Compact body of 30mm width and 30mm height
    • Dust and water proof: IP65
      By installing a tube on air release port on back, IP65 can be maintained.
    • A power saving mode is available. Battery life: about 3 years.
      One push to indicate pressure value. The expected battery life is when pressure displayed at 5 times a day basis.
    • Visible indication of battery change timing
      Low battery is notified by blinking battery icon.
    • Rich option parts
      Wall bracket, upright bracket, and panel adapter set

Return to the page top.

Respond to high-speed drive cylinder.
Light & compact design φ3mm type (Eco-friendly) is added.

Quick Exhaust Valve EQ Mini type

WEB release 2013/09

WEB last update 2014/01/28

    • Downsizing of tube diameter from φ4mm→φ3mm enables to reduce air consumption by 90,000 litters per year !
      ●By only piping → 36% reduction! ●Including cylinder → 10% reduction!
       ※Cylinder condition: Cylinder bore:φ20mm, Stroke:100mm, Double-acting single rod
        Annual operation: 2,160,000 times, Pressure: 0.5MPa (with pipe length: 2m)
    • Redesign of conventional 2 types!
      EQE type and EQY type are redesigned. Stick-out silencer on EQE type, which caused a problem when connecting a tube, was resolved and smooth tubing is realized.
    • Cylinder direct-mount type is newly released!
      Exhaust needle-valve type and female thread type are available. Female thread type can be arranged to either exhaust to air type or tube exhaust type depending on the connecting devices so that it can meet to wide range of applications.

Return to the page top.

Parallel quadruple layout pump

Rotary Vacuum Pump/RPV064

WEB release 2013/05

WEB last update 2015/04/09

    • Parallel quadruple layout pump (Low vacuum 120 litters type) is newly released!

Return to the page top.

High efficiency ! Suitable for wide uses such as defoaming, deaeration, vacuum packing, and vacuum transportation.

Rotary Vacuum Pump / PRV06

WEB release 2013/05

WEB last update 2014/01/28

    • Corresponding to save energy
      Rotary Vacuum Pump achieved market leading high efficiency in pumping speed at motor rated power 1(w)
      ⇒1.0/1.2[Pumping speed (L/min)/Motor rated power(W)](50/60Hz)
    • Light and Compact
      Saving space is realized by the special rotor shape.
    • Low heat generation
      Low heat generation is realized by forced-air cooling system.
      Because of installation of magnet coupling, no sliding and moving of rotary shaft seal are occurred. Besides, no heat is generated by the seal.
      Highly-efficient rotary motor suppresses motor part heating
    • Low operating noise & Low vibration
      With thoroughly considered balance design of the rotating part, low operating noise and low oscillation are realized.
    • Long service life
      By using super engineering plastic which is superior in self-lubricating and abrasion resistance and special surface treatment, excellent durability is completed.
      With a steady imperceptible clearance between rotor and cylinder, contactless structure and minimization of sliding section are achieved.
      With adoption of magnet coupling, no slide seal is necessary.
      ・No maintenance is necessary for seal abrasion.
      ・Minimized load on motor shaft supports motor's long service life.
    • Low operating noise and Low vibration
      With thoroughly considered balance design of motor part, low operating noise and low oscillation are realized.
    • Low dust emission
      Clean grease for vacuum with excellent superiority in low dust emission and low volatility is used. No lubrication is necessary.
      Minimization sliding portion enables low dust emission.
      ・This rotary vacuum pump suppresses contamination of environment by wear debris as vane pump causes.
    • Environmentally safe and Safety design
      RoHS conforming & CE Marking conforming
    • Wide variety in option
      Various options are available for not only pump unit, but quick fitting and exhaust cleaner (exhaust silencer).

Return to the page top.

Anti-static models are newly introduced! Best suitable for miniature parts assembly.

Anti-static Air Pincette Series

WEB release 2013/04

WEB last update 2014/01/30

    • It is the best for the small part assembly under the environment where static electricity is disliked.
      Surface resistance: 104~108Ω
    • A vacuum pad and a vacuum generator are built in a pen like body.
      By connecting a 4mm OD tube and supplying 0.5MPa compressed air, it generates vacuum by closing a hole or pushing a button to suck up a small work.
    • 2 types are available.
      Built-in push valve VTB type, which passes air only in use for saving air consumption and low noise, and no push valve VTA type.

Return to the page top.

Inch size is newly introduced! Polyolefin type resin which is suitable for clean environment is used.

Polyolefin Tube CTA

On sale

WEB release 2013/01

WEB last update 2014/05/15

    • 2 types of hardness for variety of uses.
      Recommend CTA for a sufficient flow rate and CTB for a flexible piping
    • Superior waterproof
    • 6 tube colors
      Color : Black, Clear Red, Clear Yellow, Clear Green, Clear Blue, and Clear White
    • 2 packing ways are available.
      Choose either normal packing or clean-room packing whose tube is washed by clean air and packed in a clean room (equivalent to ISO class 6).

Return to the page top.

Inch size is newly introduced! Polyolefin type resin which is suitable for clean environment is used.

Soft Polyolefin Tube CTB

On sale

WEB release 2013/01

WEB last update 2014/05/15

    • 2 types of hardness for variety of uses.
      Recommend CTB for piping in a narrow space and CTA for a sufficient flow rate
    • Superior waterproof
    • 6 tube colors
      Color : Black, Clear Red, Clear Yellow, Clear Green, Clear Blue, and Clear White
    • 2 packing ways are available.
      Choose either normal packing or clean-room packing whose tube is washed by clean air and packed in a clean room (equivalent to ISO class 6).

Return to the page top.

Thin, light weight and highly functional handy pressure gauge

Handy Manometer

On sale

WEB release 2012/12

WEB last update 2014/05/15

    • Easily viewable display
      Large display (3 & 1/2 digit LCD display)
    • 3 types of pressure ranges
      Compound gauge pressure(GPH-S),Compound gauge pressure (low range)(GPH-V), and Absolute pressure(GPH-B)types are selectable depending on applications.
    • Easy to use and rich functions
      0 adjustment function, indicated value retention, and auto power off. Analog output function is also equipped.
    • Low power consumption design
      Using commercially available dry-cell batteries (AAA battery x 2 pcs), last about 1000 hours. (Batteries are not equipped with Manometer.)