Search result:{{ $data.dynamicItemsLength }}item(s)

Search result:29item(s)

News

Fitting

The Tube Fitting comes in a wide variety of models to meet all your needs in pneumatic piping.
Water is admitted conditionally. (Excluding Space saving type)

Fluid medium
Air, Water (Conditional)
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Corresponding product

  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.
  • After vacuum ultrasonic cleaning with HFE (hydro fluoro ether) in a clean room, deaeration packaging is performed.

Fitting

Tube Fitting Mini Series

RoHS2 Compliant

Mini-type fitting is 40% smaller than the standard type fitting.

Fluid medium
Air
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
  • Special stainless steel is used for the main metal parts. Special stainless steel: Corrosion resistance is equivalent to SUS303, making it ideal for environments prone to corrosion.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Corresponding product

  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.

Fitting

Minimal Fitting

RoHS2 Compliant

Barb joint best suitable for space-saving piping.
They are optimal for piping vacuum equipment. (Use with vacuum tube.)

Fluid medium
Air
Max. operating pressure
0.5MPa(0.4MPa with vacuum tube)
Max. vacuum
-100kPa
Operating temp. range
0~50℃(No freezing)
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
  • Special stainless steel is used for the main metal parts. Special stainless steel: Corrosion resistance is equivalent to SUS303, making it ideal for environments prone to corrosion.

Corresponding product

  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.

Fitting

Tube Fitting SUS316

RoHS2 Compliant

Newly introducing Lock-claws type Push-in fitting made of SUS316.

Fluid medium
Air, Water, Others such as chemicals (Conditional)
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
-5~150℃(No freezing)
Metal
  • SUS316 is used for the main metal parts. SUS316: Excellent corrosion resistance.
Seal rubber
  • FKM is used as seal rubber material. FKM: Excellent in heat resistance, chemical resistance, and ozone resistance.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.

Fitting

Compression fitting made of SUS316, which is highly resistant to corrosion.

Fluid medium
Air, Water, Others such as chemicals (Conditional)
Max. operating pressure
Depending on max.operating pressure of tube
Max. vacuum
-100kPa
Operating temp. range
Depending on operating temp. range of tube(No freezing)
Metal
  • SUS316 is used for the main metal parts. SUS316: Excellent corrosion resistance.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.
  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.

Fitting

This tube fitting serves best where strength is required or the atmosphere contains chemicals.

Fluid medium
Air, Water, Others such as chemicals (Conditional)
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • SUS304 is used for the main metal parts. SUS304: Ideal for use where strength is required or in a chemical atmosphere.
Seal rubber
  • FKM is used as seal rubber material. FKM: Excellent in heat resistance, chemical resistance, and ozone resistance.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Fitting

This tube fitting serves best where strength is required or corrosive atmosphere.

Fluid medium
Air, Water (Conditional*)
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Seal rubber
  • HNBR is used for the seal rubber material. HNBR: A material with improved ozone resistance by adding hydrogen to NBR. Ideal for low-concentration ozone countermeasures.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.

Fitting

This ultra small barb fitting is best suitable for requiring corrosive resistance or use in chemical atmosphere where space-saving piping is required.

Fluid medium
Air
Max. operating pressure
0.5MPa(0.4MPa with vacuum tube)
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Metal
  • Special stainless steel is used for the main metal parts. Special stainless steel: Corrosion resistance is equivalent to SUS303, making it ideal for environments prone to corrosion.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.

Fitting

Tube Fitting Chemical

RoHS2 Compliant

All-resin (PPS) made fitting, which possesses excellent heat resistance, noncombustible (UL94 V-0 equivalent) and chemical resistance and the seal is made of fluoric rubber, to meet a wide variety of applications.

Fluid medium
Air, Water, Others such as chemicals (Conditional)
Max. operating pressure
0.9MPa(at0~20℃)
Max. vacuum
-100kPa
Operating temp. range
0~80℃(No freezing)
Resin
  • PPS is used for the main resin parts. PPS: PPS: Excellent heat resistance, flame retardancy (UL94 V-0), and chemical resistance.
Seal rubber
  • FKM is used as seal rubber material. FKM: Excellent in heat resistance, chemical resistance, and ozone resistance.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.

Fitting

Suitable for chemical liquid piping in semiconductor manufacturing process.

"WAREHOUSE CLEARANCE SALE" of Teflon fittings. If you are interested, please contact us at info@pisco.com.

CLEARANCE SALE with SPECIAL PRICE FIRST COME, FIRST SERVED ONLY LIMITED-TIME SALES.

Fluid medium
Liquid (Conditional*)
Max. operating pressure
0.7MPa(at0~60℃)
Operating temp. range
Impact-ring material PVDF:0~150℃(No freezing)
Operating temp. range
Impact-ring material PPS:0~200℃(No freezing)
Resin
  • PFA, PTFE, and PVDF are used for main resin parts. PFA and PTFE: Excellent chemical resistance and heat resistance. PVDF: Excellent chemical resistance and mechanical strength.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.
  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.
  • After vacuum ultrasonic cleaning with HFE (hydro fluoro ether) in a clean room, deaeration packaging is performed.

Fitting

Tube Fitting PP / SUS304

RoHS2 Compliant

PP (Polypropylene) is selected for the body material and EPDM for seal material to adapt to clean environment.

Fluid medium
Air, Water, Others such as chemicals (Conditional)
Max. operating pressure
1.0MPa(at0~20℃)
Max. vacuum
-100kPa
Operating temp. range
0 to 80°C (No freezing)※with Sealock:0 to 60°C (No freezing)
Resin
  • PP is used for the main resin parts. PP: PP: Excellent chemical resistance, high transparency, and ideal for clean environments.
Metal
  • SUS304 is used for the main metal parts. SUS304: Ideal for use where strength is required or in a chemical atmosphere.
Seal rubber
  • EPDM is used as the seal rubber material. EPDM: Excellent weather resistance, cold resistance, and ozone resistance. Care must be taken as it is less resistant to mineral oils.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.
  • After vacuum ultrasonic cleaning with HFE (hydro fluoro ether) in a clean room, deaeration packaging is performed.

Fitting

PP (Polypropylene) is selected for the body material and EPDM for seal material to adapt to clean environment.

Fluid medium
Air, Water, Others such as chemicals (Conditional)
Max. operating pressure
1.0MPa(at0~20℃)
Max. vacuum
-100kPa
Operating temp. range
0~80℃(No freezing)
Resin
  • PP is used for the main resin parts. PP: PP: Excellent chemical resistance, high transparency, and ideal for clean environments.
Metal
  • Special stainless steel is used for the main metal parts. Special stainless steel: Corrosion resistance is equivalent to SUS303, making it ideal for environments prone to corrosion.
Seal rubber
  • EPDM is used as the seal rubber material. EPDM: Excellent weather resistance, cold resistance, and ozone resistance. Care must be taken as it is less resistant to mineral oils.
  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.
  • After vacuum ultrasonic cleaning with HFE (hydro fluoro ether) in a clean room, deaeration packaging is performed.

Fitting

Tube Fitting EG

RoHS2 Compliant

Tube Fitting EG type adopts antistatic resin material.
Best suitable for the environment dislikes static electricity.

Fluid medium
Air
Max. operating pressure
0.6MPa
Max. vacuum
-100kPa
Operating temp. range
0~40℃(No freezing)
Volume resistance
Conductive PBT 1x103 Ω・cm, Conductive POM 1x102 Ω・cm
Resin
  • Electrostatic dissipative resin is used for the main resin parts. :The surface resistance is 104 to 107Ω. Ideal for manufacturing and assembly lines that dislike static electricity.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

Tube Fitting Spatter

RoHS2 Compliant

The joint made of a flame-retarded resin is highly resistant to spatters (UL94 V-0 equivalent).
The cover prevents malfunction of the release ring due to spatter.

Fluid medium
Air, Water (Conditional)
Max. operating pressure
0.9MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • Flame retardant resin is used for major resin parts. Flame-retardant resin: UL94 V-0 equivalent. Excellent weld spatter resistance.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

Tube Fitting Brass

RoHS2 Compliant

Not only the body but also the release ring is made of brass, so that these models feature excellent flame/spatter resistance and heat resistance.

Fluid medium
Air, Water, Heat medium oil(Conditional)
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~100℃(No freezing)
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • HNBR is used for the seal rubber material. HNBR: A material with improved ozone resistance by adding hydrogen to NBR. Ideal for low-concentration ozone countermeasures.
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.

Options

  • No lubrication is used during assembly.

Fitting

By using special brass in the main metal body, this product line has achieved the high resistant performance against water.
Best suitable for Auto Industry and Thermal Control for mold tooling.

Fluid medium
Air, Water, Others such as chemicals (Conditional)
Max. operating pressure
Depending on max.operating pressure of tube
Max. vacuum
-101.3kPa
Operating temp. range
Depending on operating temp. range of tube(No freezing)
Metal
  • Brass is used for the main metal parts.
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
  • No lubrication is used during assembly.

Fitting

Molding Die Temperature control coupling.
Push the release sleeve and remove the joint part, then you see no projection on the die.

Fluid medium
Air
Max. operating pressure
0.9MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • HNBR is used for the seal rubber material. HNBR: A material with improved ozone resistance by adding hydrogen to NBR. Ideal for low-concentration ozone countermeasures.
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.

Fitting

Tube Fitting Long

RoHS2 Compliant

This type of tube fitting comes in eight lengths to suit your applications.

Fluid medium
Air, Water (Conditional*)
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

Stop Fitting

RoHS2 Compliant

Push-in fitting with built-in stop valve.
The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and allow air flow when the tube is connected.

Fluid medium
Air
Max. operating pressure
0.9MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

Rotary Joint

RoHS2 Compliant

These piping joints are used for swiveling and swinging connections.

Fluid medium
Air
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.
  • FKM is used as seal rubber material. FKM: Excellent in heat resistance, chemical resistance, and ozone resistance.

Fitting

High Rotary Joint

RoHS2 Compliant

Push-in fitting joint best suitable for high-speed swiveling and swinging connections.

Fluid medium
Air
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.
  • FKM is used as seal rubber material. FKM: Excellent in heat resistance, chemical resistance, and ozone resistance.

Fitting

Rotary joint SUS304

RoHS2 Compliant

Push-in fittings for rotary section piping in corrosion-resistant environments.
Water specification type (RWL) can be used with water.

Fluid medium
Air spec.(RAL): Air, other gases (conditional)/Water spec. (RWL): Water, other liquids (conditional)
Max. operating pressure
0.7MPa
Max. vacuum
Air spec. (RAL): -100kPa/Water spec. (RWL):-
Operating temp. range
0~60℃(No freezing)
Allowable rotation
500min-1
Resin
  • PPS is used for the main resin parts. PPS: PPS: Excellent heat resistance, flame retardancy (UL94 V-0), and chemical resistance.
Metal
  • SUS304 is used for the main metal parts. SUS304: Ideal for use where strength is required or in a chemical atmosphere.
Seal rubber
  • FKM is used as seal rubber material. FKM: Excellent in heat resistance, chemical resistance, and ozone resistance.
  • EPDM is used as the seal rubber material. EPDM: Excellent weather resistance, cold resistance, and ozone resistance. Care must be taken as it is less resistant to mineral oils.
  • No copper-based metallic material is used in flow paths
  • No lubrication is used during assembly.

Fitting

Multi-Circuit Rotary Joint

RoHS2 Compliant

Best suitable for piping of index tables or other rotary equipment.

Fluid medium
Air
Max. operating pressure
0.9MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Metal
  • Brass with electroless nickel plating is used for the main metal parts.

Fitting

This fitting absorbs the twist in the tubing of pneumatic tools, etc.

Fluid medium
Air
Max. operating pressure
0.8MPa(0.4MPa with vacuum tube)
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

Main Block

RoHS2 Compliant

These block parts can be assembled freely into a variety of manifold blocks for concentrated branching.

Fluid medium
Air
Max. operating pressure
1.0MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

2-Circuit Junction Block

RoHS2 Compliant

This add-on type concentrated branching joint serves two lines the same time.

Fluid medium
Air, Water (Conditional)
Max. operating pressure
0.9MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

Connector

RoHS2 Compliant

The Connector realizes simultaneous connection and disconnection of multiple lines.
It makes easy moving of the devices.

Fluid medium
Air
Max. operating pressure
0.9MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

Light Coupling

RoHS2 Compliant

The Light Coupling is small and light weight, which enable attach and detach with only one hand.
Compatible with other manufacturer's couplings.

Fluid medium
Air, Water(E3, E7 series)(Conditional)
Max. operating pressure
0.9MPa
Max. vacuum
-100kPa
Operating temp. range
0~60℃(No freezing)
Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Fitting

Color Cap

RoHS2 Compliant

Color caps can be used for identification of different applications of the joints.