Fitting

Tube Fitting Spatter

RoHS2 Compliant

The joint made of a flame-retarded resin is highly resistant to spatters (UL94 V-0 equivalent).
The cover prevents malfunction of the release ring due to spatter.

Resin
  • Flame retardant resin is used for major resin parts. Flame-retardant resin: UL94 V-0 equivalent. Excellent weld spatter resistance.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.

Advantages

The joint made of a flame-retarded resin is highly resistant to spatters (UL94 V-0 equivalent).
The cover prevents malfunction of the release ring due to spatter.

Flame-retarded plug is newly introduced.

Specifications

Fluid medium Air, Water(Conditional*)
Max. operating pressure 0.9MPa
Max. vacuum -100kPa
Operating temp. range 0~60℃(No freezing)

Warnings

* Make sure to follow the instructions below when the fluid medium is water.

Surge pressure must be controlled lower than max. operating pressure when using water as a fluid medium.

Tap water in Japan free from foreign substances or contamination can be used. Carry out the evaluation under an actual operating condition for using other kind of water.

Be sure to place Insert Ring (WR) into the tube edge when using water as a fluid medium.

Port size

Tube dia.

mm size(mm) φ4, φ6, φ8, φ10, φ12

Thread size

Metric thread M5x0.8, M6x1
Taper pipe thread R1/8, R1/4, R3/8, R1/2

Construction

Type & Price list

Thread & Tube connection (3 types)

Tube & Tube connection (3 types)

Plug (1 type)

Detailed Safety Instructions

Warning

1.When the fluid medium is water, do not use fittings unless the operating environment meets all the described specifications in the catalog. Otherwise, it may cause damage to the products, the escape of tubes and a fluid leakage.

Caution

1.When using Anti-spatter Tube, peel the cover as the following table shows. It may cause the escape of a tube, a fluid leakage or make it impossible to insert the tube into Push-In Fitting, if the tube is not peeled properly. * PISCO product Anti-spatter Tube Cover Peeler can help you to peel the cover easily.

2.Spatter may accumulate on the release ring when using Plug (PP) type.

Frequently Asked Questions for Fitting Series

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.