Fitting

High Rotary Joint

RoHS2 Compliant

Push-in fitting joint best suitable for high-speed swiveling and swinging connections.

Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.
  • FKM is used as seal rubber material. FKM: Excellent in heat resistance, chemical resistance, and ozone resistance.

Advantages

Push-in fitting joint best suitable for high-speed swiveling and swinging connections.

By employing two ball bearings, suitable for high-speed swiveling and swinging connections where the Rotary Joint cannot cover.

Port size

Tube dia.

mm size(mm) φ4, φ6, φ8, φ10, φ12
inch size φ5/32", φ3/16", φ1/4", φ5/16", φ3/8", φ1/2"

Thread size

Metric male thread M5x0.8, M6x1
Taper pipe male thread R1/8, R1/4, R3/8, R1/2
Taper pipe female thread Rc1/8, Rc1/4, Rc3/8, Rc1/2
UNF thread 10-32UNF
NPT thread NPT1/8, NPT1/4, NPT3/8, NPT1/2

Construction

Type & Price list

Detailed Safety Instructions

Caution

1.High Rotary Joint series can bear a certain amount of radial load. However it may reduce the lifetime of the product. Be sure to verify the resistance when the load is large.

2.Use polyurethane tube for the high rotation applications. Hard tubes like nylon base may cause radial load to the fitting.

3.Tightening with excessive torque may cause a deformation of the metal hexagonal-column, leading a poor rotation or a fluid leakage.

Frequently Asked Questions for Fitting Series

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.