Control Valve

Speed Controller

RoHS2 Compliant

The most standard Speed Control Valve for driving devices.

Resin
  • PBT is used for the main resin parts. PBT: A standard resin material that is ideal for general environments.
Metal
  • Brass with electroless nickel plating is used for the main metal parts.
Seal rubber
  • NBR is used for the seal rubber material. NBR: A material generally used as a sealing material. Please note that it is inferior in ozone resistance.
  • HNBR is used for the seal rubber material. HNBR: A material with improved ozone resistance by adding hydrogen to NBR. Ideal for low-concentration ozone countermeasures.

Options

  • Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.

Advantages

The most standard Speed Control Valve for driving devices.

The tube lead-out directions are free.

The resin body rotates and the tube lead-out direction can be changed.

For Free type, the fitting part rotate.

For Free type, the fitting part and resin body rotate.

Universal-type is best combination with pen-type cylinders.

Suitable for space-saving piping. As for Universal-type, the resin body A, B and the fitting part rotate respectively.

Clean-room Package, best suitable for speed control in cleanroom, is prepared. (Optional)

Fluorine grease is applied. Washed by clean air and packed in ISO class 6 equivalent clean-room.

Specifications

Check valve spec.:Standard

Fluid medium Air
Operating pressure range 0.1~0.9MPa
Check valve opening pressure 0.05MPa
Operating temp. range 0~60℃ (No freezing)

Check valve specifications:Low opening pressure type

Fluid medium Air
Operating pressure range 0.05~0.5MPa
Check valve opening pressure 0.02MPa
Operating temperature range 0~60℃ (No freezing)

Small Union Straight

Fluid medium Air
Operating pressure range 0.05~1MPa
Check valve opening pressure 0.005MPa
Operating temp. range 0~60℃ (No freezing)

Port size

Tube dia.

mm size(mm) φ3, φ4, φ6, φ8, φ10, φ12
inch size φ1/8, φ5/32, φ3/16, φ1/4, φ5/16, φ3/8, φ1/2

Thread size

Metric male thread M3x0.5, M5x0.8
Taper pipe male thread R1/8, R1/4, R3/8, R1/2
UNF Thread 10-32UNF
NPT Thread NPT1/8, NPT1/4, NPT3/8, NPT1/2

Flow Characteristic Graph

Type & Price list

Detailed Safety Instructions

Warning

1.To adjust the speed of the actuator, gradually turn the needle from the fully closed position to increase the air volume. If the needle is open, there is a risk of the actuator move suddenly and violently. Turning the needle clockwise closes the valve, while turning it counter-clockwise opens it.

2.When adjusting the flow rate of the equipment, the needle should be turned to open gradually from the fully closed position. If the needle is in open position, a high flow rate will be instantly applied to the equipment and there is a risk of damage to it.

Caution

1.Leakage is allowed for the control flow even when the needle is fully closed position and should not be used in such a way that zero leakage is required.

Frequently Asked Questions for Control Valve Series

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.