Tube

Soft Polyolefin Tube

RoHS2 Compliant

Adopting a polyolefin type resin suitable for clean environment. Compared to soft polyolefin tube, it is suitable for application requiring sufficient flow rate. Color;6 colors, Size;8 sizes including Inch O.D. Compared to Polyolefin tube (CTA), it is suitable for applications requiring flexibility. Color;6 colors, Size;8 sizes including Inch O.D.

Bending radius

  • 6Color

Advantages

Suitable for clean environment and requiring tubing flexibility

Suitable for application requiring flexible piping under clean environment

Adopting a polyolefin type resin suitable for clean environment

Superior water resistance

Tubing color comes in 6 colors

Cleanroom wash/packaging is available

Cleaning and packing in cleanroom ISO class 6 equivalent

Tube overview

Tube color samples

Actual colors may vary due to the different display methods on your computer monitor.

Specifications

Fluid medium Air, Water (Conditional *1), Others such as chemicals (Conditional *1)
Max. operating pressure (65%RH at 20º) 0.8MPa (*2)
Max. vacuum -100kPa
Operating temperature range -15~80ºC (No freezing)

Warning

*1) Adhere to the following conditions in case the fluid is water or any liquids

Surge pressure must be controlled lower than max. operating pressure when using water or any liquids as a fluid medium

Tap water in Japan, which is soft water (low mineral content) can be used. Carry out the evaluation under an actual operating condition for using other kind of water

Be sure to place Insert Ring (WR) into the tubing end when the tubing is inserted into Push-in Fitting with water or any liquids oil as a fluid medium

In case of using with water, the tubing can be discolored but it does not affect the performance of tubing

Can be used with numerous chemicals but please check the chemical compatibility before use

*2) The value of max. operating pressure is measured at 20ºC at 65%RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve

Port size

mm size

O.D.xI.D.(φmm) 4x2.5, 6x4, 8x5, 10x6.5, 12x8

Inch size

O.D.xI.D.(φin) 1/4x0.163, 3/8x0.236, 1/2x0.335

*) 4mm O.D.(4x2.5) is the same as 5/32" O.D.(5/32x0.098), 8mm O.D. (8x5) is 5/16" O.D.(5/16x0.197) as well

Type & Price list

mm size

Inch size

Detailed Safety Instructions

Warning

1.In case of using with chemicals, solvents or mixed gases, please check the chemical compatibility before use. Incorrect use could result in breakdown of fittings, fluid leakage or tubing falling off

2.Since this product has low hardness and the surface is easily scratched, press down on the release-ring of the push-in fitting when installing.

Frequently Asked Questions for Tube Series

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.