Rotary Vacuum Pump

Rotary Vacuum Pump RPV06A Medium vacuum, 30L 3 phase motor type

RoHS2 Compliant

[Panasonic motor]Rotary vacuum pump with low noise operation, low vibration & high efficiency. Medium vacuum, 30L. Built-in 40W 3-phase motor.

Advantages

Rotary vacuum pump realizing low driving noise, low vibration & high efficiency. Added power switch type to single phase 100V specifications (parallel twin & in-line twin)

Contribute to energy saving.

The top level high efficiency in the industry is realized for the pumping speed per motor power 1(W).→ 1.0/1.2 [pumping speed (ℓ/min)/motor power (W)] (50/60Hz)

Light weight and compact.

Space saving is realized by adoption of the special rotor form.

Low driving noise and vibration.

Low noise operation and low vibration are realized by thorough balancing design for rotary part.

Low heat generation.

Low generation of heat is realized by adoption of forced air-cooling system. No rotating seal structure by magnet coupling minimizes slide section. Thus, there is no heat generation by the seal.

Long life.

High durability is realized by adopting of super engineering plastic, which is excellent in self-lubricity and wear resistance, and special surface treatment. With minimum clearance between rotor and cylinder wall, the fundamentally contactless structure and minimization of sliding parts are realized.
Adoption of magnet-coupling, no sliding seal required.

Low generation of dust.

Lubrication is unnecessary by adoption of the excellent clean vacuum grease for low dust and low volatile. Low dust generation is realized by minimization of sliding parts. Suppress environmental pollution such as abrasion powder created by vane pump.

Eco friendly and safe design.

RoHS compliance, CE marking corresponding.

Variety of options.

Not only a pump but also push-in fittings, compression fittings for medium vacuum model, and exhaust cleaners (exhaust mufflers) are prepared as optional parts.

Specifications

No. of cylinder Twin (2)
Cylinder layout In-line layout
Pumping speed (L/min) 30(50Hz)/36(60Hz)
Final vacuum (Pa abs) ≦350(50Hz)/≦300(60Hz)
Final vacuum (kPa G) ≦-100.95(50Hz)/≦-101.0(60Hz)
Max. suction pressure Atmospheric pressure
Ambient temperature (indoor)(℃) 5~40
Ambient humidity (indoor) Max. 85%RH (No dew condensation)
Gas (inhaled gas) No corrosive or exposable gas
Vibration of installation site Max. 4.9m/s2(10~60㎐)
Altitude of installation site 1000m ASL or less
Install orientation Motor axis to be horizontal
Motor output (W) 40
Motor type 3-phase motor, Built-in thermal protector Heat proof class:130(B)
Motor Voltage (V)(*1) 200/220/230
Rated current (A)(50Hz) 0.31/-/-
Rated current (A)(60Hz) 0.29/0.28/0.29
Rated rotation speed (min-1)(50Hz) 1,350/-/-
Rated rotation speed (min-1)(60Hz) 1,625/1,675/1,675
Striking current (A)(50Hz) 0.9/-/-
Striking current (A)(60Hz) 0.82/0.91/0.96
Operation noise (dB(A))(*2) ≦58(50Hz)/≦63(60Hz)
Vacuum port size G3/8
Exhaust port size G1/4
Dimensions (mm) (width x depth x height) 125x284.6x166.5
Weight (kg) 7.2
Cooling system Forced air cooling

*1. Temporary fluctuation range of voltage is within ±10% of rated voltage. In case of continuous fluctuation, ±3% of rated voltage is allowable.

*2. Operating noise is an actually measured value excluding suction and exhaust noises, and is not a guaranteed value. Operating noise varies depending on operating condition.

Port size

Vacuum port

Push-in fitting Tube O.D.

MM size (mm) φ10, φ12, φ16
Inch size φ3/8", φ1/2", φ5/8"

Compression fitting Tube I.D.

MM size (mm) φ6.5, φ7, φ8, φ9, φ11, φ13

Thread size

Parallel pipe female thread G3/8

Exhaust port

Push-in fitting Tube O.D.

MM size (mm) φ10, φ12
Inch size φ3/8", φ1/2"

Compression fitting Tube I.D.

MM size (mm) φ6.5, φ7, φ8, φ9

Thread size

Parallel pipe female thread G1/4

Characteristic Graph

Ordering Information

Detailed Safety Instructions

Frequently Asked Questions for Rotary Vacuum Pump Series

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.