Vacuum Pad

Free Holder

RoHS2 Compliant

Suitable for picking up work-pieces with non-vertical position or with unfixed angle.

Advantages

Suitable for picking up work-pieces with non-vertical position or with unfixed angle.

Possible to give vacuum pad angle freely, just by installing it between the pad and the holder.

Port size

Pad size(mm)

10 φ10, φ15
20 φ20~φ50, 4x10~8x30
60 φ60~φ100

* Holder size code “20” is applicable for pad size ø10mm and ø15mm for sponge series due to the structural reasons.

Type & Price list

The list of shapes and prices lists typical models.
Please refer to the digital catalog for other models.

Detailed Safety Instructions

Warning

1.This product should not be used in any combination other than with PISCO brand vacuum pads and direct mounting filters, or for any other purpose. This product is designed for use with PISCO brand vacuum pads and may cause damage to the unit depending on how it is used.

Caution

1.Pay attention to the orientational position of the product when it is in suctioned. Depending on the weight or the acceleration and impact of the transport, the orientational position after suction will change.

2.When installing or replacing this product, refer to the tightening torques shown in the following table and tighten with the appropriate tool using the parallel cut on the periphery.

Frequently Asked Questions for Vacuum Pad Series

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.