Solenoid Valve

Solenoid Valve SVB

RoHS2 Compliant

Standard type Solenoid Valve which is focusing on basic performance and providing good cost-performance.

Advantages

Standard type Solenoid Valve designed to place importance on basic functions.

Equipped with push & lock manual button as standard specification.

It enhances operational efficiency during maintenance work.

The body is prepared in two different colors.

Silver and light gray are available. Color choice depending on the usage environmen is possible. (Only light gray is available for 10 series. )

Equipped with individual connectors.

Top lead-out and side lead-out are available, depending on the installation environment.

Specifications

Specifications of Pilot Valve (10 Series)

Operating system Direct acting operation
Valve structure Elastic seal, Poppet valve
Tolerance of voltage range 21.6~26.4VDC (For 24VDC), 90~110VAC(For 100VAC)
Power Consumption (with LED) 0.55W (For 24VDC)/1VA(For 100VAC)
Surge protection circuit Surge absorber (24VDC), Bridge diode (For 100VAC)
Manual operation Push-lock button
Connector lead-out direction Connector (Straight type: Top / Elbow type: Side)
Operation indicator LED

Specifications of Pilot Valve(15, 18, 22Series)

Operating system Direct acting operation
Valve structure Elastic seal, Poppet valve
Tolerance of voltage range 21.6~26.4VDC (For 24VDC), 90~110VAC(For 100VAC), 99~121VAC (For 110VAC), 180~220VAC (For 200V AC),198~242VAC (For 220VAC)
Power Consumption (with LED) 0.8W (For 24VDC), 1VA(For 100VAC, 1.1VA (For 110VAC), 2VA (For 200VAC), 2.2VA (For 220VAC)
Surge protection circuit Surge absorber (24VDC), Bridge diode (For VAC)
Manual operation Push-lock button
Connector lead-out direction Connector (Straight type: Top, Elbow type: Side)
Operation indicator LED

Specifications of 10 Series Main Valve

Fluid Medium Air
Operating Pressure Range 0.2~0.7MPa(SVB10S, D)/0.3~0.7MPa (SVB10A, R, P)
Pressure Resistance 1.05MPa
Operating Temp. Range 5~50℃
Installing Direction No Restriction (*1)
Operating system Indirectly activated Pneumatic Operation by Pilot Valve
Port Thread Size M5x0.8
Valve Stracture Spool Valve (Elastic Seal)
No. of Position 2 positions (SVB10S, D)/ 3 positions (SVB10A, R, P)
No. of Port 5-Port
Valve Function Single (SVB10S)/Double (SVB10D, A, R, P)
Response
Time (→ON) (*2) 15msec (SVB10S)/12msec (SVB10D)/15msec (SVB10A, R, P) (*3)
Response
Time(→OFF) (*2) 20msec (SVB10S)/ 25msec (SVB10A, R, P) (*3)
Max. Operation Cycle 5Hz
Min. Excitation Time 50msec (SVB10D)
Lubrication Not Required

*1. Refer to “Warning” in “Detailed Safety Instructions”

*2. Values with 24VDC at 0.5MPa of supply.

*3. Response Time for 3-Position represents the value from neutral position to ON and from ON to neutral position (OFF).

Flow Characteristics of 10 series

Item Effective Sectional Area(mm2)
1(P)→4(A), 2(B) 3[0.16] (SVB10S, D)/2.8[0.15] (SVB10A)/2.2[0.12] (SVB10R)/4[0.22] (SVB10P)/2.2[0.12] (SVB10P at neutral position)
4(A), 2(B)→5(R1), 3(R2) 2[0.11] (SVB10S, D)/2.2[0.12] (SVB10A,P)/4[0.22] (SVB10R)/2.2[0.12] (SVB10R at neutral position )

* The value in [ ] is CV.

10 Series Cylinder Speed Table

Cylinder Speed (mm/s) Cylinder Tube bore (mm)
100 ~φ40
200 ~φ32
300 ~φ25
400 ~φ20
500 ~φ20
600 ~φ20
700 ~φ20

*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.

*2. The cylinder speed can vary according to the configuration of piping and fittings.

*3.The data in the above table represents the value when ø6mm Push-In Fitting is used on 4(A) and 2(B) ports of SVB10D.

Specifications of 15 Series Main Valve

Fluid medium; Air
Operating pressure range 0.15~0.7MPa(SVB15S, D)/0.2~0.7MPa (SVB15A, R, P)/0.15~0.7MPa (SVB15J, L, M, M, Y, Z)
Pressure Resistance 1.05MPa
Operating Temp. Range 5~50℃
Installing Direction No Restriction (*1)
Operating system Indirectly activated Pneumatic Operation by Pilot Valve
Port Thread Size M5x0.8 (*2)
Valve Stracture Spool Valve (Elastic Seal)
No. of Position 2 positions (SVB15S, D, J, L, M, M, Y, Z)/3 positions (SVB15A, R, P)
No. of Port 5-port (SVB15S, D, A, R, P)/3ポート (SVB15J, L, M, N, Y, Z)
Valve Function Single (SVB15S, J, L, M, N)/Double (SVB15D, A, R, P, Y, Z)
Response
Time (→ON) (*3) 15msec (SVB15S)/12msec (SVB15D, A, R, P)/13msec (SVB15J, L, M, N)/9msec (SVB15Y, Z)
Response
Time (→OFF) (*3) 20msec (SVB15S)/30msec (SVB15A, R, P)/18msec (SVB15J, L, M, N)
Max. Operation Cycle 5Hz
Min. Excitation Time 50msec (SVB15D, Y, Z)
Lubrication Not Required

*1. Refer to “Warning” in “Detailed Safety Instructions”.

*2. SVB15J, L, and Y are valves to mount on a manifold base so that there is no thread cutting on 1(P), 5(R1) and 3(R2) ports.

*3. Values with 24VDC at 0.5MPa of supply.

Flow Characteristics of 15 Series

Item Effective Sectional Area (mm2)
1(P)→4(A), 2(B) 3.4[0.18] (SVB15S, D)/3.2[0.17] (SVB15A,R)/3.7[0.20] (SVB15P)/3.2[0.17] (SVB15P at neutral position)/3.4[0.18] (SVB15J, L, M, N, Y, Z)
4(A), 2(B)→5(R1), 3(R2) 3.2[0.17] (SVB15S,D,R,J,L,M,N,Y,Z)/3[0.16] (SVB15A,P)/3.2[0.17] (SVB15R at neutral position)

* The value in [ ] is CV.

15 Series Cylinder Speed Table

Cylinder Speed (mm/s) Cylinder Tube bore (mm)
100 ~φ63
200 ~φ50
300 ~φ40
400 ~φ40
500 ~φ32
600 ~φ25
700 ~φ25
800 ~φ20

*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.

*2. The cylinder speed can vary according to the configuration of piping and fittings.

*3. The data represents the value when ø6mm Push-In Fitting is used on 4(A) and 2(B) ports of SVB15D.

Specifications of 18 Series Main Valve

Fluid medium; Air
Operating pressure range 0.15~0.7MPa(SVB18S, D)/0.2~0.7MPa (SVB18A, R, P)/0.15~0.7MPa (SVB18J, L, M, M, Y, Z)
Pressure Resistance 1.05MPa
Operating Temp. Range 5~50℃
Installing Direction No Restriction (*1)
Operating system Indirectly activated Pneumatic Operation by Pilot Valve
Port Thread Size Rc1/8 (*2)
Valve Stracture Spool Valve (Elastic Seal)
No. of Position 2 positions (SVB18S, D, J, L, M, M, Y, Z)/3 positions (SVB18A, R, P)
No. of Port 5-port (SVB18S, D, A, R, P)/3-port (SVB18J, L, M, N, Y, Z)
Valve Function Single (SVB18S, J, L, M, N)/Double (SVB18D, A, R, P, Y, Z)
Response
Time (→ON) (*3) 20msec (SVB18S)/15msec (SVB18D, A, R, P)/23msec (SVB18J, L, M, N)/14msec (SVB18Y, Z)
Response
Time (→OFF) (*3) 35msec (SVB18S)/50msec (SVB18A, R, P)/31msec (SVB18J, L, M, N)
Max. Operation Cycle 5Hz
Min. Excitation Time 50msec (SVB18D, Y, Z)
Lubrication Not Required

*1. Refer to “Warning” in “Detailed Safety Instructions”.

*2. SVB18J, L, and Y are valves to mount on a manifold base so that there is no thread cutting on 1(P), 5(R1) and 3(R2) ports.

*3. Values with 24VDC at 0.5MPa of supply.

Flow Characteristics of 18 Series

Item Effective Sectional Area(mm2)
1(P)→4(A), 2(B) 13[0.70] (SVB18S, D, P, J, L, M, N, Y, Z)/5.2[0.28] (SVB18A, R)/5.5[0.30] (SVB18P at neutral position)
4(A), 2(B)→5(R1), 3(R2) 9.5[0.51] (SVB18S, D)/4.5[0.24] (SVB18A)/14[0.76] (SVB18R)/4.5[0.24] (SVB18R at neutral position)/5[0.27] (SVB18P)/13[0.7] (SVB18J, L, M, N, Y, Z)

*The value in [ ] is CV.

18 Series Cylinder Speed Table

Cylinder Speed (mm/s) Cylinder Tube bore (mm)
100 ~φ100
200 ~φ80
300 ~φ63
400 ~φ50
500 ~φ50
600 ~φ40
700 ~φ40
800 ~φ32
900 ~φ32
1000 ~φ32
1100 ~φ25

*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.

*2. The cylinder speed can vary according to the configuration of piping and fittings.

*3. The data represents the value when ø8mm Push-In Fitting is used on 4(A) and 2(B) ports of SVB18D.

Specifications of 22 Series Main Valve

Fluid medium; Air
Operating pressure range 0.2~0.7MPa(SVB22S, D)/0.3~0.7MPa (SVB22A, R, P)
Pressure Resistance 1.05MPa
Operating Temp. Range 5~50℃
Installing Direction No Restriction (*1)
Operating system Indirectly activated Pneumatic Operation by Pilot Valve
Port Thread Size 1(P)・4(A)・2(B) Port:Rc1/4、5(R1)・3(R2) Port:Rc1/8
Valve Stracture Spool Valve (Elastic Seal)
No. of Position 2positions (SVB22S, D)/3 positions (SVB22A, R, P)
No. of Port 5-Port
Valve Function Single (SVB22S)/Double (SVB22D, A, R, P)
Response
Time (→ON) (*2) 25msec (SVB22S)/18msec (SVB22D)/25msec (SVB22A, R, P)
Response
Time (→OFF) (*2) 40msec (SVB22S)/68msec (SVB22A, R, P)
Max. Operation Cycle 5Hz
Min. Excitation Time 50msec (SVB22D)
Lubrication Not Required

*1. Refer to “Warning” in “Detailed Safety Instructions”.

*2. Values with 24VDC at 0.5MPa of supply.

Flow Characteristics of 22 Series

Item Effective Sectional Area(mm2)
1(P)→4(A), 2(B) 18[0.98] (SVB22S, D)/13[0.70] (SVB22A, R)/15[0.81] (SVB22P)/9[0.49] (SVB22P at neutral position)
4(A), 2(B)→5(R1), 3(R2) 11.5[0.62] (SVB22S, D)/10[0.54] (SVB22A,P)/12[0.65] (SVB22R)/8.5[0.46] (SVB22R at neutral position)

* The value in [ ] is CV.

22 Series Cylinder Speed Table

Cylinder Speed (mm/s) Cylinder Tube bore (mm)
100 ~φ125
200 ~φ80
300 ~φ80
400 ~φ63
500 ~φ50
600 ~φ50
700 ~φ40
800 ~φ40
900 ~φ40
1000 ~φ32
1100 ~φ32

*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.

*2. The cylinder speed can vary according to the configuration of piping and fittings.

*3. The data represents the value when ø10mm Push-In Fitting is used on 4(A) and 2(B) ports of SVB22D.

Flow Characteristic Graph

Ordering Information

Stand-alone unit, Direct Piping Type

10 Series Manifold Piping Type

Manifold

Manifold base alone

Block Plate

Detailed Safety Instructions

Caution

1.When the manual cover of the Series 10 is closed, the manual button cannot be operated manually or locked.

Frequently Asked Questions for Solenoid Valve Series

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.