Solenoid Valve

Solenoid Valve SVR

RoHS2 Compliant

Compact, yet keeps large capacity.
Featuring external pilot air specification, controlled pressure can be applied from 0MPa.

Advantages

Compact, yet keeps large flow capacity.
Featuring external pilot air specification, controlling air pressure from 0MPa is possible.

Body height is 42mm.

9 valve types

Easy replacement of input /output port

The cartridge fitting can be replaced easily by removing a lock pin.

Controlling air pressure from 0MPa is possible.

Featuring external pilot air, the actuator can be controlled at very low pressure from 0MPa while Standard model requires more than 0.2MPa control pressure, due to the pilot valve operation.

Specifications

Specifications of Sub-D Connector Manifold type

Fluid medium; Air
Operating pressure range;0.2~0.7MPa, 0 ~ 0.7MPa with External Pilot Air Port(*1), Pressure range of External Pilot Air Port: 0.2 ~ 0.7MPa
Proof pressure 1.05MPa
Operating temp. range;5~50℃
Installing direction No restriction (*2)
Vibration Resistance; 50m/s2
Impact Resistance;150m/s2
Max. Mountable Number of Valve Unit MAX. 12 units
Wiring Type; Sub-D connector, For 2 to 4 stations: 9 pins, For 5 to 12 stations: 25 pins

*1. When twin 3-way valve is mounted: 0.2 ~ 0.7Mpa。

*2. Refer to “Warning” in “Detailed Safety Instructions”.

Specifications of Flat cable type Manifold

Fluid medium; Air
Operating pressure range;0.2~0.7MPa, 0 ~ 0.7MPa with External Pilot Air Port(*1), Pressure range of External Pilot Air Port: 0.2 ~ 0.7MPa
Proof pressure 1.05MPa
Operating temp. range 5~50℃
Installing direction No restriction (*2)
Vibration Resistance 50m/s2
Impact Resistance 150m/s2
Max. Mountable Number of Valve Unit MAX. 12 units
Wiring Type Flat cable connector, No. of
Pins:10 pins (2 to 4 stations), 20 pins (5 to 9 stations), and 26 pins (10 to 12 stations)

*1. When twin 3-way valve is mounted: 0.2 ~ 0.7Mpa。

Specifications of Individual Plug-in type Manifold

Fluid medium; Air
Operating pressure range;0.2~0.7MPa, 0 ~ 0.7MPa with External Pilot Air Port(*1), Pressure range of External Pilot Air Port: 0.2 ~ 0.7MPa
Proof pressure 1.05MPa
Operating temp. range 5~50℃
Installing direction No restriction (*2)
Vibration Resistance 50m/s2
Impact Resistance 150m/s2
Max. Mountable Number of Valve Unit MAX. 20 units
Wiring Type Individual Plug-in, No. of
Pins:3 pins

*1. When twin 3-way valve is mounted: 0.2 ~ 0.7Mpa。

*2. Refer to “Warning” in “Detailed Safety Instructions”.

Specifications of Pilot Valve (24VDC)

Operating system Direct acting operation
Valve structure Elastic seal, Poppet valve
Tolerance of voltage range 21.6~26.4VDC
Power Consumption (with LED) 0.7W
Surge protection circuit Surge absorber
Manual operation Push-lock button
Max. Operating Pressure 0.7MPa
Operation Displaying LED LED(4(A):Green, 2(B):Red)

Specifications of Pilot Valve (100VAC)

Operating system Direct acting operation
Valve structure Elastic seal, Poppet valve
Tolerance of voltage range 90~110VAC
Power Consumption 1.25VA
Surge protection circuit Bridge Diode
Manual operation Push-Lock Button
Max. Operating Pressure 0.7MPa
Operation Displaying LED LED(4(A):Green,、2(B):Red)

Specifications of Main Valve

Operating system Indirectly activated Pneumatic Operation by Pilot Valve
Valve Stracture Spool Valve (Elastic Seal)
Valve Type 2-Position 5-Port/2-Position 3-Port (3-Portx2)/3-Position 5-Port
Valve Function Single/Singlex2/Double
Response
Time(*1)(→ON) 13msec/12msec/10msec(varies by Valve type)
Response
Time(*1)(→OFF) 15msec/11msec/8msec (varies by Valve type)
Max. Operation Cycle 5Hz
Min. Excitation Time 50msec (Double Solenoid)
Lubrication Not Required
Operating pressure range 0.2 ~ 0.7MPa (0 to 0.7MPa with External Pilot Air Port)

*1. The value at supply air: 0.5MPa with DC24V

*2. Response Time for 3-Position represents the value from neutral position to ON and from ON to neutral position (OFF).

Flow Characteristics (SVR10S, D)

Item Effective Sectional Area:(mm2 [Cv])
1(P)→4(A), 2(B) ø8mm compression fitting 6.0 [0.33]
1(P)→4(A), 2(B) ø6mm 6.0 [0.33]
1(P)→4(A), 2(B) ø4mm 4.0 [0.22]
1(P)→4(A), 2(B) ø3mm 2.6 [0.14]
1(P)→4(A), 2(B) ø1.8mm 1.1 [0.06]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø8mm 5.6 [0.30]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø6mm 5.6 [0.30]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø4mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø8mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø6mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø4mm 2.9 [0.16]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]

* The value at the spec of 5/3(R1,R2) and Port: ø10mm Fitting.

Flow Characteristics (SVR10A)

Item Effective Sectional Area (mm2 [Cv])
1(P)→4(A), 2(B) ø8mm compression fitting 4.7 [0.25]
1(P)→4(A), 2(B) ø6mm 4.7 [0.25]
1(P)→4(A), 2(B) ø4mm 3.8 [0.21]
1(P)→4(A), 2(B) ø3mm 2.6 [0.14]
1(P)→4(A), 2(B) ø1.8mm 1.1 [0.06]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø8mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø6mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø4mm 3.3 [0.18]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø8mm 3.1 [0.17]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø6mm 3.1 [0.17]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø4mm 2.9 [0.16]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]

* The value at the spec of 5/3(R1,R2) and Port: ø10mm Fitting.

Flow Characteristics (SVR10R)

Item Effective Sectional Area (mm2 [Cv])
1(P)→4(A), 2(B) ø8mm compression fitting 4.7 [0.25]
1(P)→4(A), 2(B) ø6mm 4.7 [0.25]
1(P)→4(A), 2(B) ø4mm 3.8 [0.21]
1(P)→4(A), 2(B) ø3mm 2.6 [0.14]
1(P)→4(A), 2(B) ø1.8mm 1.1 [0.06]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø8mm 6.7 [0.36]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø6mm 6.7 [0.36]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø4mm 4.3 [0.23]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø8mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø6mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø4mm 3.4 [0.18]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]

* The value at the spec of 5/3(R1,R2) and Port: ø10mm Fitting.

Flow Characteristics (SVR10P)

Item Effective Sectional Area (mm2 [Cv])
1(P)→4(A), 2(B) ø8mm compression fitting 6.8 [0.37]
1(P)→4(A), 2(B) ø6mm 6.8 [0.37]
1(P)→4(A), 2(B) ø4mm 4.3 [0.23]
1(P)→4(A), 2(B) ø3mm 2.6 [0.14]
1(P)→4(A), 2(B) ø1.8mm 1.1 [0.06]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø8mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø6mm 3.6 [0.20]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø4mm 3.3 [0.18]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø8mm 3.1 [0.17]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø6mm 3.1 [0.17]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø4mm 2.9 [0.16]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]

* The value at the spec of 5/3(R1,R2) and Port: ø10mm Fitting.

Flow Characteristics (SVR10E) (SVR10G)(N.C) (SVR10H)(N.C)

Item Effective Sectional Area (mm2 [Cv])
1(P)→4(A), 2(B) ø8mm compression fitting 3.5 [0.19]
1(P)→4(A), 2(B) ø6mm 3.5 [0.19]
1(P)→4(A), 2(B) ø4mm 3.3 [0.18]
1(P)→4(A), 2(B) ø3mm 2.6 [0.14]
1(P)→4(A), 2(B) ø1.8mm 1.1 [0.06]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø8mm 5.1 [0.28]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø6mm 5.1 [0.28]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø4mm 4.0 [0.22]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø8mm 3.5 [0.19]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø6mm 3.5 [0.19]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø4mm 3.1 [0.17]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]

* The value at the spec of 5/3(R1,R2) and Port: ø10mm Fitting.

Flow Characteristics (SVR10F) (SVR10G)(N.O) (SVR10H)(N.O)

Item Effective Sectional Area (mm2 [Cv])
1(P)→4(A), 2(B) ø8mm compression fitting 5.9 [0.32]
1(P)→4(A), 2(B) ø6mm 5.9 [0.32]
1(P)→4(A), 2(B) ø4mm 4.0 [0.22]
1(P)→4(A), 2(B) ø3mm 2.6 [0.14]
1(P)→4(A), 2(B) ø1.8mm 1.1 [0.06]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø8mm 5.1 [0.28]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø6mm 5.1 [0.28]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø4mm 4.0 [0.22]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) Without Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø8mm 3.5 [0.19]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø6mm 3.5 [0.19]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø4mm 3.1 [0.17]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø3mm 2.1 [0.11]
4(A), 2(B)→5(R1), 3(R2) With Exhaust
Check Valve(*) ø1.8mm 0.5 [0.03]

* The value at the spec of 5/3(R1,R2) and Port: ø10mm Fitting.

Cylinder Speed Table

Cylinder Speed (mm/s) Cylinder Tube bore (mm)
100 〜φ80
200 ~φ50
300 〜φ40
400 〜φ32
500 〜φ32
600 〜φ25
700 〜φ25
800 〜φ20

*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.

*2. The cylinder speed can vary according to the configuration of piping and fittings.

*3. The data represents the value when ø6mm Push-In Fitting is used on 4(A) and 2(B) ports of SVR10D.

Flow Characteristic Graph

Ordering Information

Mounting Valve

Exhaust Check Valve

Detailed Safety Instructions

Caution

1.The cartridge fitting can be attached and detached by removing the retaining pin, but make sure that the retaining pin is securely inserted before use.

2.Carefully read and understand the instructions for the replacement of cartridge fittings.

3.Carefully read the instructions to understand how to replace the cartridge fittings and how to pipe the ø8 mm tube compression fittings.

4.The exhaust check valve is used to reduce the circulate pressure from the exhaust circuit. Note that it is not completely airtight in the reverse direction.

Frequently Asked Questions for Solenoid Valve Series

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.