Control
HOME > Product Control > Throttle (Needle) Valve
Throttle (Needle) Valve 

R ![]() |
M ![]() |
S ![]() |
Fluid medium | Air |
---|---|
Operating pressure range | 0~0.9MPa |
Max. vacuum | -100kPa |
Operating temp. range | 0~60ºC (No freezing) |
■Tube diameter
MM size (mm) | ø4, ø6, ø8, ø10, ø12 |
---|---|
Inch size | ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2 |
■Thread size
Metric thread | M5x0.8 |
---|---|
Taper pipe thread | R1/8, R1/4, R3/8, R1/2 |
Unified thread | 10-32UNF |
National pipe thread taper | NPT1/8, NPT1/4, NPT3/8, NPT1/2 |
REMARKS of the products
●Throttle (Needle) Valve Small Union Straight 【JSMU】 >> Dimensions and flow characteristics
●Metal body design changes & spec. unification of Speed Controller and Throttle Valve
●【IMPORTANT: F1 pitch revised】Release of Speed Controller Small type and Throttle Valve Small type & Discontinuation of JSU and JNU
Throttle valve controls the operation speed of a pneumatic device and the transmission of air pressure signals.
The flow rate can be adjusted while the air is flowing.
- The lead-out directions are free. For Free type, the fitting part and resin body rotate.

- Clean-room Package, best suitable for flow control in cleanroom, is prepared. (Optional)Fluorine grease is applied and washed by clean air, then packed in ISO class 6 cleanroom.