Control
HOME > Product Control > Throttle (Needle) Valve ET
Throttle (Needle) Valve ET 

R | M ![]() |
Fluid medium | Air |
---|---|
Operating pressure range | 0~0.9MPa |
Operating temp. range | 0~60ºC (No freezing) |
■Tube diameter
Metric thread | M5x0.8 |
---|---|
Taper pipe thread | R1/8, R1/4, R3/8, R1/2 |
Unified thread | 10-32UNF |
National pipe thread taper | NPT1/8, NPT1/4, NPT3/8, NPT1/2 |
This Exhaust Needle Valve controls the exhaust flow rate.
- The valve can be attached directly to a solenoid valve.Best suitable to install where a cylinder or like mechanism has no sufficient space around for a speed controller or adjustment of the needle. (Note: Install the valve not far away from a cylinder.

- Low cost type flow control valveThis valve is less expensive than the speed controller.