Control
HOME > Product Control > Regulator (Will be discontinued in Oct. 2021)
Regulator (Will be discontinued in Oct. 2021) 
R  |
M  |
S  |
|
| Fluid medium | Air |
|---|---|
| Operating pressure range | 0~0.9MPa |
| Pressure setting range | 0.1~0.8MPa |
| Indicated pressure range | 0~0.8MPa |
| Accuracy (gauge) | +/-5% (full span) |
| Operating temp. range | 0~60ºC (No freezing） |
■Tube diameter
| MM size (mm) | ø4, ø6, ø8 |
|---|---|
| Inch size | ø5/32, ø3/16, ø1/4, ø5/16 |
■Thread size
| Metric thread | M5x0.8 |
|---|---|
| Taper pipe thread | R1/8, R1/4 |
| Unified thread | 10-32UNF |
| National pipe thread taper | NPT1/8, NPT1/4 |
- Details
The compact design enables pressure control in the middle of piping.
- A relief mechanism is incorporated. When the primary pressure is introduced from the thread side, a reduced pressure comes out from the joint side.
- Equipped with check function. It can be used as check type regulator by installing between a solenoid valve and an actuator.
- Gauge mount type is available.The compact pressure gauge mount type is best suited for use with a manifold type solenoid valve.
