|Operating pressure range||-100~0 kPa|
|Filtering accuracy||10 μm|
|Operating temp. range||0~60ºC (No freezing)|
|Metric size (mm)||ø1.8, ø3, 4, ø6, ø8, ø10, ø12, ø16|
|Metric thread||M3x0.5, M4x0.7, M5x0.8, M6x1|
Vacuum Filter removes the dust and water drops sucked in by the Vacuum Generator.
- VFR type・Using the element and cyclone effect, the vacuum Filter removes the dust and water drops sucked in by the Vacuum Generator.
・The large dust case reduces the frequency of maintenance.
・Exhaust circuit type which is connected to the exhaust port of vacuum generator is available.
- VFB type・As the whole dust case can be removed in a snap, dust is not scattered.
・Vacuum circuit type which is connected between vacuum pad and vacuum generator.
- VFU0, VFU1 typeThis minimum volume vacuum filter is very effective for use in applications requiring high rates.
- VFU0, VFU1 typeEither quick fitting or female screw can be chosen for IN and OUT side joint components.
- VFU2, VFU3 typeIt can be installed in mid-flow of piping easily and stabilized with low pipe resistance
- The model with "No Copper Alloy" and "Low-level Ozone Resistance" is available for VFU1, 2 and 3 models.No copper alloy model is used for the metal parts and HNBR is used for seal rubber materials.
- VFJ typeBest suitable for stand-alone type ejector without built-in vacuum filter.
- VFJ typeFilter and Plug-in Union Fitting are integrated. PP (Polypropylene) resin is used for body materials realizing low cost.
- VFF typeInstalled between pad and pad holder, the vacuum filter removes the dust sucked in.